User Manual

1110
model no. 058-9844-2 | contact us 1-888-670-6682
No. Description
1
2
3
No. Description
4
5
6
Air Compressor
Size and Power
1 1/2–2 HP 2 1/2 HP 3 HP and more
4–6 Gallons
8–11 Gallons
15+ Gallons
and more
6
1
2
5
3
Trigger
Magazine
Air inlet plug
Magazine pusher latch
Safety tip
Depth adjustment dial
Compatible compressors
GUIDELINES FOR PROPER USE AND OPERATION
Be sure to use a proper air compressor with MAXIMUM
®
air-powered
tools. The compressor should be able to supply a minimal air delivery of
5.5 CFM @ 90 PSI to ensure the compressor can run continuously with
the MAXIMUM
®
air-powered Clipped-Head Framing Nailer.
Features of the Clipped-Head Framing Nailer
• This lightweight MAXIMUM
®
Air-powered Clipped-Head Framing Nailer
• It features:
the simple flip of a toggle switch;
a rubber-grip handle for improved control and added comfort, even
during extended use;
a tool-free driving depth adjustment for driving nails flush or
countersunk into various materials;
a dry-fire lock-out that alerts user to re-load nails and eliminates empty fire;
a rear-loading magazine made of extruded aluminum for lighter weight
and added durability; and
–
– a toggle switch allows for either sequential or contact fire mode with
–
–
–
–
– a lightweight and well-balanced magnesium body for job site durability
and less user fatigue;
a hardened claw tip that reduces wear and limits slippage when the tool
is driven at an angle.
This framing nailer is ideal for construction framing, wall sheathing,
roof sheathing, floor decking and similar applications.
•
Light duty and
intermittent use
Light duty and
intermittent use
Medium duty and
intermittent use
Light duty and
intermittent use
Medium duty and
intermittent use
Heavy duty and
continuous use
Light duty and
intermittent use
Medium duty and
intermittent use
Heavy duty and
continuous use
drives 2 to 3 1/2" (50 to 90 mm) long clipped-head framing nails.
4
R