TABLE OF CONTENTS TECHNICAL SPECIFICATIONS SAFETY INSTRUCTIONS IMPORTANT INFORMATION PARTS LIST KNOW YOUR TOOL OPERATING INSTRUCTIONS MAINTENANCE WARRANTY NOTE: If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-888-670-6682. SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions. Read all instructions and follow them with use of this product.
TM TECHNICAL SPECIFICATIONS WORK AREA SAFETY MOTOR KEYLESS CHUCK VARIABLE SPEED RANGES TORQUE CLUTCH POSITION MAX. TORQUE ON BOARD WORK LIGHT BATTERY COMPATIBLE MAXIMUM BATTERY CHARGER COMPATIBLE MAXIMUM CHARGER OPTIMUM CHARGING TEMPERATURE DIMENSIONS WEIGHT • 18V DC 1/2” METAL, single-sleeve 0–450 / 0–1550 RPM (no load) 16 including drilling mode 450 in-lb LED 20V max* (2.
• SAFETY INSTRUCTIONS • • Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection will reduce personal injuries. BATTERY TOOL USE AND CARE Avoid accidental starting. Ensure the switch is in the “off” position before connecting to a power source and/or battery pack, or picking up or carrying the tool.
SAFETY RULES FOR BATTERY PACK AND CHARGER ADDITIONAL INFORMATION ON BATTERY AND CHARGER • If the battery pack casing is cracked or damaged, do not insert into charger. • The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the charging notes and procedures. There is a danger of electric shock or electrocution. SAFETY INSTRUCTIONS TM , • Don t allow any liquid to get inside charger. Electric shock may result.
TM No. Description No. Description 1 Keyless chuck 7 Remaining power indicator 2 Torque clutch 8 Battery release button 3 LED worklight 9 Rechargeable battery pack 4 Forward & reverse lever 10 Charging indicator 5 Trigger switch 11 Charger 6 High/low speed range selector 12 Detachable cable & plug 7 PARTS LIST 8 1 2 20 3 6 4 5 6 10 1 15 2 9 11 12 14 13 4 3 5 19 16 7 17 10 18 11 12 8 WARNING! • Remove the product and any accessories from the package.
OPERATING INSTRUCTIONS FITTING AND REMOVING THE BATTERY PACK TO THE DRILL DRIVER • To install the battery pack to the tool, align the raised portion of the battery pack with the grooves on the bottom of the tool handle, and slide it firmly into the handle until you hear the lock snap into place. (Fig. A) • To remove the battery pack from the tool, press the battery pack release button and slide the battery pack completely out of the tool handle.
TM FORWARD AND REVERSE ADJUSTABLE TORQUE CONTROL The direction of bit rotation is reversible and is controlled by a selector located above the trigger switch. (Fig. D) This drill is equipped with 16 torque clutch positions, including one drill mode, which are controlled by the torque clutch. All of the torque settings are clearly identified on the torque collar. To adjust the torque settings, rotate the torque collar. The higher the number, the higher the torque setting. (Fig.
TM INSTALLING AND REMOVING BITS BELT HOOK • Open the chuck by unscrewing it in a counter-clockwise direction while holding the drill. Do this sufficiently to allow the drill bit to enter the jaws of the chuck. The belt hook is used to hang the tool on your waist belt while working. Install the belt hook securely in the groove of the drill and tighten the screw to fix the hook firmly. (Fig. I) • Ensure the drill bit is fully inserted, so that the chuck jaws grip the straight section of the bit.
TM TEMPERATURE CUT OUT DRILLING PLASTICS AND PLASTIC COATED CHIPBOARD If the drill is constantly overloaded, or the drill is used constantly at maximum rating in high ambient temperatures, the battery cells may overheat causing the battery pack to shut down. When this occurs you will need to immediately stop drilling and allow the battery cells to cool down. • Use high-speed drill bits LOW VOLTAGE CUT OUT This drill is not designed for drilling masonry. Purchase or rent a hammer drill.
GENERAL MAINTENANCE BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries.
5-YEAR LIMITED WARRANTY This MAXIMUM product is guaranteed for a period of 5 years from the date of original retail purchase against defects in workmanship and materials only and is subject to the following components: a) Component A: The carrying case is guaranteed for a period of 1-year from the date of original retail purchase against defects in workmanship and materials. WARRANTY b) Component B: Accessories, including drill bits and saw blades, do not carry a warranty.
24 model no. 054-1349-8 | contact us 1-888-670-6682 relating to interruption, delays, errors or omissions; in each case under any theory of law or equity, arising out of or in any way related to this warranty, even if advised of the possibility thereof.
TABLE OF CONTENTS TECHNICAL SPECIFICATIONS SAFETY IMPORTANT INFORMATION PARTS LIST KNOW YOUR TOOL OPERATING INSTRUCTIONS MAINTENANCE WARRANTY NOTE: If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-888-670-6682. SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions. Read all instructions and follow them with use of this product.
TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS MOTOR HEX-DRIVE CHUCK VARIABLE SPEEDS MAX. TORQUE ON-BOARD WORK LIGHT BATTERY COMPATIBLE MAXIMUM® BATTERY CHARGER COMPATIBLE MAXIMUM® CHARGER OPTIMUM CHARGING TEMPERATURE DIMENSIONS WEIGHT 18V DC 1/4” quick-connect 0–2700 RPM / 0–3300 BPM 1500 in-lb LED 20V max* (2.0 Ah) lithium-ion 054-3203-2 ; 054-3206-6 35-minute, diagnostic 054-3204-0 50 to 86°F (10 to 30°C) 6 3/16 x 7 13/32 x 2 11/16” (156 x 188 x 68 mm) 2 lb 5 oz (1.
• SAFETY INSTRUCTIONS • • Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection will reduce personal injuries. BATTERY TOOL USE AND CARE Avoid accidental starting. Ensure the switch is in the “off” position before connecting to a power source and/or battery pack, or picking up or carrying the tool.
SAFETY INSTRUCTIONS • “seating” or removing a fastener depending on the torque setting of the tool. ADDITIONAL INFORMATION ON BATTERY AND CHARGER Accessories and tool may get hot during operation. Wear gloves when handling them if performing heat producing applications such as drilling metals. • The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the charging notes and procedures.
TM 1 No. Description No. Description 1 Locking sleeve 7 Rechargeable battery pack 2 LED worklight 8 Charger 3 Forward & reverse lever 9 Charging indicator 4 Trigger switch 10 Detachable cable & plug 5 Remaining power indicator 6 Battery release button 3 2 4 5 6 9 7 PARTS LIST 10 1 11 8 12 14 2 2 4 3 13 17 15 16 9 8 5 18 10 6 WARNING! • Remove the product and any accessories from the package.
OPERATING INSTRUCTIONS INTENDED USE This tool is intended for the fastening and loosening of bolts, nuts and various threaded fasteners within the respective range of dimensions. This cordless impact driver has a collet that accepts only standard 1/4” (6.35 mm) hexagonal shank accessories with power groove. The electronic variable speed also provides more control to prevent stripping of the screw and damage to the work surface.
TM ON/OFF TRIGGER SWITCH OPERATING INSTRUCTIONS To turn the tool on, squeeze the trigger switch. To turn the tool off, release the trigger switch. VARIABLE SPEED The variable speed trigger switch delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure. Use the variable speed to start screwing tasks, then fully press the trigger switch once the task has started.
TM ACCESSORY HOLDER DRIVING SCREWS WITH VARIABLE SPEED Install the accessory holder securely in the groove of the drill and tighten the screw to fix the holder firmly. (Fig. G) A bit may be stored on the accessory holder by snapping it into place. The technique is to start slowly, increasing the speed as the screw runs down. Set the screw snugly by slowing to a stop. Prior to driving screws, pilot and clearance holes should be drilled. Always hold the machine straight on the screw to be tightened.
TM FASTENING WITH SCREWS GENERAL MAINTENANCE This procedure will enable you to fasten materials together with your tool without stripping, splitting or separating the material. (Fig. H) Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. First, clamp the pieces together and drill the first hole 2/3 the diameter of the screw.
TM BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING 5-YEAR LIMITED WARRANTY To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.
i) this warranty will not apply to any product that was sold to the original purchaser as a reconditioned or refurbished product (unless otherwise specified in writing); j) this warranty will not apply to any product or part thereof if any part from another manufacturer is installed therein or any repairs or alterations have been made or attempted by unauthorized persons; k) this warranty will not apply to normal deterioration of the exterior finish, such as, but not limited to, scratches, dents, paint
24 model no. 054-3224-2 | contact us 1-888-670-6682 90-DAY SATISFACTION GUARANTEE If you are not completely satisfied with the performance of your MAXIMUM product for any reason, you can return it within 90 days from the date of purchase with proof of purchase for exchange or a full refund.