Top Camera DualCam Video Doorbell Instruction Manual Speaker Button Microphone LEDs Bottom Camera pg 08 pg 01
What’s in the Box A Industry Canada (IC) Compliance B D C E F H G UP 1x Set Screw (extra) 1x Backplate 1x Answer Doorbell 1x 15-Degree Wedge Bracket 1x Backplate Gasket 3x Wall Screws & Anchors (1 extra) 3x Wire Nuts (1 extra) 1x Wedge Gasket Safety and Regulatory Information This device complies with Industry Canada licence-exempt RSS standard(s).
For more information, check out our Help Center: MaximusLighting.com/support Phone: (855) 869-0304 Email: support@maximuslighting.com OR help.getkuna.com Phone: (855) 275-0412 Email: support@getkuna.com FCC Notice Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Doorbell Installation Guide Step 3: Note: You should have disconnected the power for your doorbell circuit when you installed the chime bypass. Please ensure that the power is still off before beginning the doorbell installation. Attach the provided backplate gasket to the backplate. Install the backplate with the 2 wall screws to the location as shown. Note: be sure that the backplate is facing the correct direction with the “Up” label visible and arrow pointing up.
