User manual

ZTE MF60 Personal Hotspot (MiFi) User Instructions

The ZTE Mifi MF60 is a personal WiFi hotspot that uses the mobile data network to

provide an internet connection for any WiFi enabled client (e.g. laptop, ipad, ipd etc.)

The MiFi or Personal hotspot device should come pre configured and ready to use.

The MiFi can be used in two ways, WiFi or wired. The easiest way to use the device is in WiFi mode. In WiFi mode up

to 5 users can share the internet connectivity of the device, where as in wired mode only one person can use the

device because it is plugged in to a computer.

General Information

1. Power button

2. Memory card slot

3. WPS button (only use if client

device supports WPS)

4. LED screen

5. External Antenna connection

6. Charger/USB port

LED Screen Indicators

Icon Description

Network signal strength

Network type, this will display either 2G or 3G

Automatically connect to the internet when powered on

Manual connection to the internet. Need to log in to admin console to connect to internet

Indicates device is abroad and registered to a roaming network

New SMS message received

WiFi Status - number indicates number of connected clients

Battery power indication

Set Up a WiFi Connection

To use the device in WiFi mode, you must have a computer that is WiFi enabled. Check with your computer

manufacturer or user manual if you are unsure. If your laptop has a separate WiFi switch, turn this to the on

position.

1. By default the WiFi signal is secured by an encryption key. This is either printed on the barcode label inside

the battery compartment or on a separate sticker on the front of the device, along with the WiFi SSID

(network name). Make a note of this as it is required later in the process.

2. Press the power button on the MiFi.

3. Wait for the LED screen to power on and register to a mobile network. The mobile network name will be

displayed in the middle of the screen.

4. The device should attempt to auto connect to the internet. Once connected it will show connected in the

bottom right corner of the screen.

5. You should now use your normal WiFi manager on your computer to locate the MiFi network name (SSID)

and connect to it.

PAGE 1
ZTE MF60 Personal Hotspot (MiFi) User Instructions The ZTE Mifi MF60 is a personal WiFi hotspot that uses the mobile data network to provide an internet connection for any WiFi enabled client (e.g. laptop, ipad, ipd etc.) The MiFi or Personal hotspot device should come pre configured and ready to use. The MiFi can be used in two ways, WiFi or wired. The easiest way to use the device is in WiFi mode.
PAGE 2
ZTE MF60 Personal Hotspot (MiFi) User Instructions Note: The steps to connect to a WiFi network vary depending on your operating system and whether you use the native application or third-party software. 6. 7. Enter the WiFi key when requested. (case sensitive) When successfully connected a number will appear next to the WiFi symbol (top right corner of the screen) to indicate one client is connected. This number will increment by 1 with the number or connected clients.
PAGE 3
ZTE MF60 Personal Hotspot (MiFi) User Instructions 9. You should now be connected to the internet and be able to browse to web sites. 10.
PAGE 4
ZTE MF60 Personal Hotspot (MiFi) User Instructions Sleep Mode After 10 minutes of no activity and no clients being connected to the MiFi, the device will enter sleep mode. The LED screen will power off, but the product will still be turned on. To exit sleep mode press the power button. It is normal for the LED screen to turn off during normal usage to conserve power, like a screen saver. To re-activate the screen, press the power button.