User's Manual

1918
By enrolling button
Accessories Management
Call
Push
Notification
Smart Alarm
WiFi ON
SMS
Mark
Smart Alarm
WiFi OFF
Alarm Notification
In the event the alarm, the alarm system will call the preset phone
number, user can pick up the phone , monitor the site, and remotely
control system by entering below numbers.
Disarm the system, press ; 0
Arm the system in the away mode, press ; 1
Turn on AC facility, press ; 5
Turn off AC facility, press ; 6
Turn on on site siren, press ; 7
Turn off on site siren, press ; 8
Monitor the site, press key; *
Press escape (#) or hang up to exit.
Phone Remote Control
Step 2, Trigger the sensors one by one, press the enroll button again or
press " " icon on the app to exit the enrolling . The enrolled sensors will
automatically appear in the Accessories menu in the app.
Tap on icon the into accessories menu, you can " "
customise the accessory name, select the zone type,and also
delte the accessory from the app, if required.
Accessories Enrollment & Zone
Accessories in the standard kit were enrolled by default.
More accessories can be paired in two ways.
You are able to pair up to 50 additional sensors, 50pcs RFID cards,
10 remote controls or keypads to the alarm system. Sensors that
are included with the alarm system are already enrolled with the
control panel.
Press the enroll button .
Step 1, Press the enroll code on touch pad or select the “ ”
on the dashboard to enter the Accessories Menu, then tap on" "icon.