User's Manual

Table Of Contents

The passive infrared sensor with novel and beautiful style, perfect

streamline can be easily installed. It is designed to detect human

movement indoor. Adopted advanced fuzzy logic chip and intelligent

analysis distinguish signal between body movement and interference

to minimize false alarms. The built-in buzzer remind you low battery

state and event of tamper alarm, which ensure your safety.

1. Detection Window

2. LED Indicator

3. Learning Button

4. Clip

5. Battery Compartment

6. Zone Jumper

7. Buzzer

8. Tamper Switch

9. Infrared Sensor

Infrared Sensor: Detects the infrared rays released by human body

motion. Please do not touch the surface and keep it clean.

Once the case is opened ,the tamper switch will be Tamper Switch:

triggered, generating an alarm signal.

Features

Wireless P.I.R Motion Detector

1. When the power is on, the LED indicator flashes

five times and buzzer beeps five times to enter

working state.

Status Indicator

LED flashed once:

Movement is detected.

LED flashes 5 times, and buzzer beeps 5 times:

Power on, tamper alarm, low battery indication.

If it’s in low battrey state,please replace it only

with1.5V/AA LR6 Manganese Dioxide Cell (

EXCELL, GP) immediately.

Test Mode & Normal Operation

TEST MODE: After switching on (inserting the batteries), the motion

detector beeps and flashes five times. This shows that the detector is

only in test mode and will remain in that mode, until it has recognized a

movement 20 times. In test mode, every movement triggers an alarm.

NORMAL OPERATION: Once the test mode has ended, the motion

detector switches to normal operation and, after the first recognized

movement, into sleep mode to save energy. The sleep mode ends after

four minutes. This helps save considerable amounts of energy when

the house or apartment is inhabited and people are constantly moving

around. In case of an alarm, however, the first movement is enough to

trigger an alarm.