Specification Sheet

PROJECT NAME:_____________________________ CATALOG NUMBER:__________________________
NOTES:______________________________________FIXTURE SCHEDULE:_________________________
Phone: [phone] | Fax: [phone] | Web: www.maxlite.com | E-mail: [e-mail]
MAX16071
Revised: 12-14-17
Page: 1 of 5
LED SLIM AREA LIGHTS
AR-MAL SERIES
FEATURES :
• Replaces up to 750 PSMH equivalent
• Universal 120-277V dimming driver standard, 347-480V available
• Dusk-to-dawn and occupancy sensor compatible
• Greater than 100,000 hour L70 lifetime at TM21 standards at 25°C
• 5-year limited warranty
MOUNTING:
• 6” Extruded Straight Arm
1
• Trunnion Swivel
• 2-3/8” Slipfitter Knuckle
CONTROLS:
RPC Option: Allow the use of 3rd party distributed intelligence control-
lers designed to connect to the fixture via our NEMA standard C136.41
3-pin twist lock receptacle to provide dimming and On/Off control. Sepa-
rate Photocontrol options are available, see page 4. Receptacle does
not come with photocell included. The photocell is sold separately.
S
E
N
S
O
R
M
O
T
I
O
N
DIMENSIONS:
Please see page 3 and 5 for dimension drawings.
NOTES:
1. The straight arm mounting fits square poles. For compatibility with round
poles, combine the straight arm mounting with a round pole adaptor. See
adaptor selection table on next page.
2. Surge Suppressor only available with 120-277V models
3. Receptacle does not come with photocell included. The photocell is sold
separately. See page 4 for ordering options.
PRODUCT DESCRIPTION:
Say goodbye to the clunky shoebox. The LED Slim Area Lights
(AR-MAL) delivers class-leading efficacy in a lightweight design that can be
effortlessly applied to new and retrofit outdoor projects. Offered in
lumen packages ranging from 7,700lm to over 35,000lm, the AR-MAL Series
achieves up to 129 lumens per watt while providing significant
long-term energy and maintenance cost savings.
Please refer to the FSP-211 Supplementary Datasheet for more product
information.
60-140W Model
280W Model
Fixture shown with
Slipfitter Knuckle
Fixture shown with
Straight Arm
C
O
N
T
R
O
L
L
E
D
R
E
M
O
T
E
MODEL SELECTION Typical order example: AR-MAL60UT550-BRA
AR-MAL
-
BR
FAMILY NOMINAL WATTAGE VOLTAGE DISTRIBUTION - CCT FINISH MOUNTING OPTIONS
AR-MAL=
Medium
Area Light
60=
100=
140=
280=
60W,150W PSMH
equivalent
100W, 250W PSMH
equivalent
140W, 400W PSMH
equivalent
280W, 750W PSMH
equivalent
U=
H=
120-277V
347-480V
T2=
T3=
T4=
T5=
Type II
Type III
Type IV
Type V
-
40=
50=
4000K
5000K
BR=
Bronze
A=
K=
T=
Straight
Arm
1
2-3/8”
Slipfitter
Knuckle
Trunnion
Swivel
(OMIT)=
MS=
3
PC=
SS=
None
Daylight/Motion Sensor
NEMA 3-pin receptacle
5kA Surge Suppressor
2
Photo/Motion Sensor: The FSP-211 uses passive infrared (PIR)
sensing technology to react to changes in infrared energy (i.e.
moving body heat) within the coverage area. This slim, low-profile
sensor is designed for installation inside the bottom of a light
fixture body and is ideal for outdoor enviroments. The sensor
operates at 120V/230V-240V and single phase 277V. The motion
sensor is fully adjustable with high and low dimmed light level
options with optional dusk to dawn control. Sensor can be
combined with various lenses to operate at mounting heights from
8’ to 40’. Please refer to page 4 for the sensor’s factory
default settings. Factory settings can be adjusted via the
FSIR-100, a wireless configuration tool. Note that the sensor
comes with photocell setting disabled and the FSIR-100 must
be purchased if photocell functionality is desired.