Specification Sheet

PROJECT NAME:_____________________________ CATALOG NUMBER:__________________________
NOTES:______________________________________FIXTURE SCHEDULE:_________________________
Phone: [phone] | Fax: [phone] | Web: www.maxlite.com | E-mail: [e-mail]
MAX16933
Revised: 11/06/18
Page: 1 of 7
LED LOW-PROFILE CANOPY
CPL SERIES
FEATURES:
• 20W replaces up to 100 watt metal halide
• 30W replaces up to 150 watt metal halide
• 40W replaces up to 175 watt metal halide
• 53W replaces up to 250 watt metal halide
• Easy one-person installation, light weight with latch allowing
both hands for wire connections hanging
• Universal 120- 277V operation
• 0-10V Dimming driver standard
• Dusk-to-dawn and occupancy sensor compatible
• Two Distribution patterns, Canopy & Parking Garage
• 5-Year Limited Warranty
CONTROLS:
Motion/Daylight Sensor with Remote Control Compatibility:
0-10V microwave-based motion sensor with integral photocontrol,
allowing for three output states: 100%; 10/20/30/50% output; or 0%
output. Detection area, hold time, daylight threshold, and dimming
level are congurable via DIP switches. At its maximum mounting
height of 32 feet, the sensor can detect motion up to 30 feet away.
Sensor mounted internally, behind lens which reduces vandalism
and provides a cleaner look.
A compatible remote control is available with the sensor,
which allows for easy sensor conguration, reprogramming,
and troubleshooting when necessary. Users should review
supplementary motion sensor datasheets and the product
instruction manual for detailed remote control programming
and operation. In the event of loss of power, remote control
programmed settings return to DIP switch programmed settings.
120-277VAC Photocontrol: Universal voltage
photocontrols turn xture on and off based on footcandle levels
to help conserve energy during daylight hours. The operating
temperature of the photocontrol is -30°F-120°F. Photocell mounted
external.
MOUNTING:
• Latch design to hold xture and allows both hands for wiring
• Standard ¾” NPT for pendant mounting (pendants by others)
• Standard adapter plate included for junction box mounting (junction
boxes by others)
• Three side-mounted ½” NPT knockouts
• Cannot be mounted directly to combustible surfaces
• Beauty Plate accessory available to cover up to 14” x 14” opening
MODEL SELECTION (Full list of order codes on pg. 2) Typical order example: CPL40AUP50BMS
CPL A U
FAMILY
NOMINAL
WATTAGE,
EQUIVALENCY
GENERATION VOLTAGE
DISTRIBUTION CCT FINISH OPTIONS
CPL=
Low
Prole
Canopy
20=
30=
40=
58=
20W, replaces
up to 100W MH
30W, replaces
up to 150W MH
40W, replaces
up to 175W MH
53W, replaces
up to 250W MH
A=
Generation A
U=
120-277V,
std
P=
C=
Parking Garage
Distribution
Canopy Distribtion
40=
50=
4000K
5000K
B=
W=
Bronze, std
White
(BLANK)=
PC=
MS=
None
120-277V
Photocell
Motion/ Day-
light Sensor
D
I
M
M
A
B
L
E
D
I
M
M
A
B
L
E
100K
HOURS
PRODUCT DESCRIPTION:
Quick to install, the LED Low-Prole Canopy is the ideal retrot solution for
100-250W HID garage and canopy luminaires. Offered in 20, 30, 40, and
53-watt versions, with different reector options for parking garage and
canopy distributions, the CPL can address a variety of application needs.
The series offers 0-10V dimming drivers standard with an optional integral
microwave motion sensor to negate interference on light output. Consuming
75 percent less energy than incumbent xtures, the CPL series provides
immediate payback and long-term energy and maintenance cost savings
PHOTOMETRICS:
All .IES les available online. Please see page 3 for Iso-footcandle layouts.
260mm
10.23”
260mm
10.23”
87.5mm
3.44”
64mm
2.51”
260mm
10.23”
260mm
10.23”
87.5mm
3.44”
64mm
2.51”
DIMENSIONS:
HIGH EFFICACY
LIGHTING
REQUIREMENTS
CAN BE USED TO COMPLY WITH
Contact Maxlite for
additional nishes.