Owners Manual

1.) Inspect components to ensure that male and
female port threads and sealing surfaces are free
of burs, nicks and scratches or any foreign material.
2.) Thread fixture into flat mounting
surface (Fig. 1). Please see detailed diagrams of
mounting trunnions below (Fig. 2).
Installation Instructions
3.) Using a wrench, adjust luminaire to desired
aiming angle and tighten screw (Fig. 3)
4.) Inspect to ensure that the screw is seated flat
on the mounting surface.
5.) Connect power to fixture (Fig. 4), referencing
wiring diagram below. Make sure the power
supply is disconnected before installing.
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 2
REV: 8/22/18
15W/20W 40W
50W
Operating Instructions FLS Series
MaxLite LED Small Flood Fixtures
®