Owners Manual

Operating Instructions FLS Series
MaxLite LED Small Flood Fixtures
®
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 4
REV: 8/22/18
Installation Instructions (Continued) - Accessories
Vandal Shield:
15W / 20W / 50W versions
1.) First, remove all 4 corner screws securing the front plate to the fixture. (Fig. 1)
2.) Next, place and align the 4 longer screws that come with the kit. There should be some thread protrusion. (Fig. 2)
3.) Then, place the 4 corner brackets in a way where the slot on the bracket is aligned with the thread on the 4
corner screws. After, secure the brackets to the 4 corner screws by using a locknut to secure the brackets in
place. (Fig. 3)
4.) Finally, align the 4 corner holes on the vandal shield with the holes on the corner brackets. Secure using the
4 smaller screws that came with the kit.