Owners Manual

Operating Instructions FLS Series
MaxLite LED Small Flood Fixtures
®
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 5
REV: 8/22/18
Installation Instructions (Continued) - Accessories
Vandal Shield:
40W version
1.) First, remove the 4 corner screws securing the front plate to the fixture. (Fig. 1)
2.) Next, align the 4 longer screws with the corner holes behind the front plate; begin screwing them in, but leave
space for the slots on the corner brackets.
Then, place the slots of the corner brackets between the screw head and the fixture plate; secure the corner
bracket by fully tightening the 4 corner screw holes. (Fig. 2)
3.) Finally, align the 4 corner holes on the vandal shield with the holes on the corner brackets. Secure using the
4 smaller screws that came with the kit. (Fig. 3)