Owners Manual

Operating Instructions FLS Series
MaxLite LED Small Flood Fixtures
®
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 6
REV: 8/22/18
Installation Instructions (Continued) - Accessories
Visors:
15W / 20W / 50W versions
1.) First, remove the 4 corner screws securing the front plate to the fixture. (Fig. 1)
2.) Next, place and align the 4 longer screws that come with the kit. (Fig. 2)
3.) After, take either component from the visor and align the tapped holes with the protruding threads from the
corner screws. Secure each thread with a locknut. (Fig. 3)
4.) Then, repeat the process for the other visor component. Make sure the smaller side hole remains underneath
the larger side hole. (Fig. 4)
5.) Finally, Secure the two visors together using the 2 side screws provided in the kit. (Fig. 5)