Owners Manual

Operating Instructions FLS Series
MaxLite LED Small Flood Fixtures
®
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 7
REV: 8/22/18
Installation Instructions (Continued) - Accessories
Visors:
40W version
1.) First, remove the 4 corner screws securing the front plate to the fixture. (Fig. 1)
2.) Next, align the taps on the visor with the corner holes and use the longer screws from the kit to secure the visor
to the fixture. Tip: An easy method to attach the visor is to put the fixture on its side and attach each component
separately. (Fig. 2)
3.) Then, repeat the same process for the other side of the visor. Make sure the larger tapped side screw hole is
on the outside. (Fig. 3)
4.) Finally, secure the two visors together by using the 2 smaller side screws provided in the kit. (Fig. 4)