Owner's Manual

Optional Remote Control Configuration Tool
The configuration process establishes the appropriate parameters for the MSWSFSP221B operation. This is done
through the FSIR-100 configuration tool. If no configuration steps are taken, the sensor will use its default parameter
values.
The FSIR-100 Wireless IR Configuration Tool is a handheld tool for changing defaults and testing of MSWSFSP221B.
It provides wireless access to the MSWSFSP221B sensors for parameter changes and testing.
The FSIR-100 display shows menus and prompts to lead you through each process. The navigation pad provides a
simple way to navigate through the customization fields.
Within a certain mounting height of the sensor, the FSIR-100 allows modification of the system without requiring
ladders or tools; simply with a touch of a few buttons.
The FSIR-100 IR transceiver allows bi-directional communication between the MSWSFSP221B and the FSIR-100
configuration tool. Simple menu screens let you see the current status of the sensor and make changes. It can
change sensor parameters such as high/low mode, sensitivity, time delay, cut off, and more. With the FSIR-100
you can also establish and store MSWSFSP221B parameter profiles.
PIR Occupancy Sensor Installation Instruction: MSWSFSP221B (Continued)
Operating Instructions WP-OP Series
MaxLite WallMAX Wall Pack
®
© Copyright 2018. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: [phone] Fax: [phone] Email: [e-mail]
Page: 8
REV: 1/18/18