User's Manual

Conventional Mode Operation, Continued
1. When a message is received, the LED indicator will glow solid yellow or green depending
if CTCSS tone or DCS has been programmed.
2. Respond to message by pressing the P-T-T lever on the side of the microphone. Press the
P-T-T continuously while talking and release to listen.
If scanning modes are enabled be sure to respond before scanning resumes, if you do not,
another call may be received and the selected channel may have to be changed. Scanning is
indicated by the scan mode icons. Refer to “ Conventional Scanning” for more descriptive
information.
Busy System Queuing
If enabled by your Dealer, Busy System Queuing will monitor the System for activity. Once the
System becomes available the System will automatically be accessed and held for a period of time,
determined by your Dealer, allowing you to transmit on the System. An audible indication will sound
along with a flashing yellow LED indication when queuing has begun and again will sound when the
System has been acquired. Busy System Queuing is available for both Trunked and Conventional
System operation. The word QUEUING will also be shown in the display when busy system queuing
has become active.
Multiple-Function Keypad Description
Your SM-2402 series has five multiple function keypad buttons located on the front panel. An
audible beep, if enabled by your Dealer, is heard each time an option button is depressed.
* Up / Down Arrow Keys -These buttons will allow you to scroll Up or Down your preprogrammed
Systems, Groups or option functions depending upon which button is pressed. A press and
release will step once, a press and hold will scroll until button is released. All System and Group
names will be shown in the display and are preprogrammed by your Dealer.
* Mode Button -This button will allow you to return to your Home System / Home Group, or toggle
between System, Group, Call Missed (CALL) and Display Brightness (BRIGHT).
Press-and-release will toggle between System, Group, call and bright selection modes. A press
and hold will tune to the Home System / Group. System and Group names will be displayed.