User's Manual

Multiple-Function Keypad Description, Continued
Call Missed
Call Missed mode, allows you to check for calls which you may have missed while away
from your radio. Call Missed is a dealer program-mable function. A continuous flashing
Phone Handset icon indicates a call or calls have been missed and are stored in the
missed call list. To check for missed calls press and release the MODE button until the
word CALL is shown in the display. Press the up or down buttons to view and select a
call you desire to answer. Once selected pressing the P-T-T of the microphone will allow
the missed call to be answered. Once answered that call will be removed from your call
list. Up to 8 unanswered calls will be stored. Any new calls beyond 8 will be removed
from the list beginning with the oldest call. Pressing the mode button a second time will
remove any unanswered calls and exit the call missed list.
NOTE: Scanning will be disabled when your call list is being accessed.
Display Brightness
Display Brightness mode, allows you to change the brightness of the display. To change
the display brightness press and release the MODE button until the word BRIGHT is
shown in the display. Press and release the up or down buttons to change the display
brightness. There are 4 levels of brightness, continuously pressing up or down buttons will
go back through your display brightness levels. Once selected the radio will return to the
previously selected System or Group.
OPT (Option) -This button will allow you to enable or disable a selected optional function. A press
and release, unless specified otherwise, will enable or disable the currently selected function
Monitor (MONITOR), Auxiliary (AUXILIARY), Public Address (P/A), no option (NONE). A press and
release followed immediately by a press and hold will allow selection of option functions using the
up or down arrow buttons. Once option is shown in display a second key press of OPT will select
option to be used under the OPT button indicated by the SCAN icon. If no button press is detected
option will not be enabled and radio will resume previous operation. All option indications will be
displayed by either an icon or in the LCD.

Scan Button - This button will allow selection between Scan and Priority scan modes. A press and
release will enable normal scanning functions