User's Manual

Status Indicators and Audible Alert Tones
Your series has a sophisticated microprocessor control which
provides a series of audible alert tones.
Upon initial power up, a quick beep indicates that the self-test of the micropro-cessor functions has
been completed satisfactorily. A series of tones may be sounded with any of the following
conditions:
z Attempt to transmit on a System / channel that is already in use when busy channel lockout
has been programmed into the radio.*
z Call Received.*
z Clear-To-Talk / Transmit, indicates you may now begin speaking. *
z Transmit not available, indicates you are denied transmit on that System / channel.*
z Busy System Queuing, indicates your radio has been placed in the queuing mode and is
attempting to access the System.
z Out of Range, indicates you are out of range of the System.
z Time-Out-Timer, indicates you have exceeded the maximum transmission time.*
z Busy Channel Lockout, indicates transmission cannot occur while channel is active.*
* Indicates a function that is initially programmed into the radio by your Dealer. The majority of
LED indications and audible alerts can be enabled or disabled by your Dealer via programming.
STATUS
DESCRIPTION LED COLOR/ICON AUDIBLE TONE DISPLAY
Normal Power On - Ready
Red, Yellow, Green
-Flashing
Single Beep
Call Received Yellow Single Beep
Correct Call Green Single Beep
Transmit Red
Busy Channel Yellow
Transmit not
Allowed
Yellow -Flashing
Busy Tone -
Repeated
Priority Icon P
Auxiliary Icon - Flashing (musical note)
System
Trunked or
Conventional
Icon SYS
Clear to Talk Red Single Beep