User's Manual

Status Indicatiors and Audible Alert Tones, Continued
STATUS DESCRIPTION LED COLOR/ICON AUDIBLE TONE DISPLAY
Trunked Out of Range
Red, Yellow -
Flashing
Two Beeps-
Repeated
RANGE
Warning Busy System
Queuing
Yellow -Flashing
Single Beeps-
every 10 seconds
QUEUING
Busy System
Accessed
Yellow -Flashing
Single Beeps
-Repeated
Queue Time-out
Single Tone -2
seconds
Time- Out -Timer Single Tone TIME OUT
Horn and Lights
Green, Yellow -
Flashing
HORN-LT
Call Missed Icon - Flashing CALL / Flashing
Phone handset
Busy Channel
Lock Out
Yellow
Busy Tone -
Repeated
BUSY
Scanning
In Normal Scan
Mode
Icon SCAN
In Priority Scan
Mode
Icon SCAN with P
Scan List Editing EDIT GRP,
EDIT PRI or
EDIT SYS
In Scan List Icon Two Beeps S or P
Not in Scan List No Icon Two Beeps
Scan Modes
Your SM-2402 series radio may be programmed for one or more scan modes
depending upon your Dealer programming.
LTR

Manual Group Scan
To enable LTR

manual Group scan, enter normal scan by a press and release of the scan button
on the radios front panel. The scan icon will show in the display. In this scan mode the radio will
scan all LTR

receive Group IDs. Upon receiving the correct ID the radio will allow transmission
on that Group ID until scanning resumes.