User's Manual

DTMF Microphone Operation, Continued
1. When the called party answers, press the P-T-T of the microphone to answer. Release the
P-T-T to listen for a response.
2. When the conversation has ended Press and hold the P-T-T of the microphone press and hold
the # key for 1 or 2 seconds to end the call. Release the P-T-T when the call has ended.
Manual Dial Operation
1. Ensure you have selected the appropriate System with an interconnect Group.
2. Press and hold the P-T-T of the microphone and enter the desired number by pressing and
releasing 0 –9, * or # keys. The dialed numbers will appear in your radio display. # will be
indicated as P in your display. Note: The # key is normally used to end, or hang up, an
interconnect system. Consult your Dealer for exact system operation.
3. When dialing is complete release the P-T-T and wait for the called party to answer.
4. When the called party answers, press the P-T-T of the microphone to answer. Release the
P-T-T to listen for a response.
5. When the conversation has ended Press and hold the P-T-T of the microphone press and hold
the # key for 1 or 2 seconds to end the call. Release the P-T-T when the call has ended.
Clearing a Dialed Number
When a number has been accidentally entered during auto dial a press and release of the CLR
key will delete an individual number. A press and hold of the CLR key will clear the entire dialed
number.
To Store a Number in Memory
1. Dial the desired number. Entered number will show in the radio display.
2. Press and release the STR key.
3. Press and release any number 0 – 9 to store the number, * and # cannot be used for storing a
number. STORed will show in the radio display indicating the number has been stored in
memory under that key.
To Recall a Stored number from Memory
1. Press and release the RCL key.
2. Press and release the number key from which a number has been stored.