User's Manual

Maxon SM5102Radio
○4 . Push and hold the ACC-703 [STR ] button to enter the message scroll mode.
○5 . Push the ACC-703 [#],[ * ] button to scroll the messages.
○6 . Push [SMS] : again to return to the standby condition
3. Transmitting an SMS
- 9 SMS memory channels are available and the messages can be edited via PC Programming and ACC-
703.
3.1 SMS Transmission
3.1.1 Using SMS memory by PC Programming
○1 Push [SMS] to enter the SMS code memory channel selection mode. Up to 9 SMS channels are
available:
○2 Push [UP] or [DOWN] to select the desired SMS Code channel.
○3 Push [ SMS ] to transmit the SMS Code in selected SMS channel.
3.1.2 Direct code entry with ACC-703
○1 During standby condition, push [STR] 3 times, to enter the SMS mode.
- Display ”SMS”
○2 Push the appropriate digit key,[0],[9], to enter the desired character.
○3 Push the CLR Key. Number or character will be deleted at cursor.
○4 Push and hold the CLR key. All messages will be deleted. the radio enter the standby mode.
○5 Push the RCL key. Press the number key. SMS message which is stored number is displayed at LCD.
○6 Push the RCL Key. Press the #,* key to removed the displayed data from the LCD. the radio enter the
standby mode.
○7 Push and hold the RCL Key. the radio is changed with Number mode and Alphabet mode.
○8 Push and hold the # key to work the space key.
○9 Push and hold the STR Key to blink the cursor. Push [*] to move the cursor to left. Push [#] to move the
cursor to the right
○10 Push the STR Key in the edit mode. Press the number key. SMS message is stored
-Display[STORE Num]
○11 Push the SND key to transmitter the SMS data.
■ TWO TONE
1. Two Tone Option
1.1 Two Tone Enable/Disable
- Enable : can receive/transmit two tone.
- Disable : cannot receive/transmit two tone
1.2 Two Tone Decoding Alert
- Enable : It rings alert sound when the radio detects two tone correctly and if no action, alert sound every
3seconds.(but first time, alert sound in 10 seconds one time)
If you do any action after detecting two tone(ex: push a key or change volume level etc…), then stop
the alert sound.
- Disable : No alert sound
1.3 Every Time Two Tone Detect
- Enable : Check the Two Tone whether correct or not whenever receive a Two Tone signal.
- Disable : Check the Two Tone one time only when receive a Two Tone signal firstly,
From Next time, don’t check the Two Tone. If you change to another channel,
Radio will repeat above.
2. Two Tone En/Decoding
You can set Individual, Group, Super Group 3 kinds of Two Tones.
2.1 Lead In Time : The time until transmit two tone after pressing PTT key.
2.2 Tone Time : The length of Tone A or Tone B
2.3 Gap Time : The length between tone A and tone B.
2.4 Two Tone Type : You can set a desire Two Tone type with PC Programmer at each channel
- Decoding : It must be correct all tone A, Gap, tone B time and frequency to open speaker.
- Encoding : Transmit Two Tone setting frequency (tone A, gap, tone B) after PTT.