User Manual

1
SP-200 series
Synthesized Scanning Radio
FCC RF EXPOSURE COMPLIANCE REQUIREMENTS FOR OCCUPATIONAL USE
ONLY
The Federal Communications Commission (FCC), with its action in General Docket 93-62, November 7,
1997, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy
emitted by FCC regulated equipment. Maxon subscribes to the same safety standard for the use of its
products. Proper operation of this radio will result in user exposure far below the Occupational Safety and
Health Act (OSHA) and Federal Communications Commission limits.
DO NOT transmit for more than 50% of total radio use time (50% duty cycle). Transmitting more than
50% of the time can cause FCC RF exposure compliance requirements to be exceeded.
This radio is NOT approved for use by the general population in an uncontrolled
environment. This radio is restricted to occupational use, work related operations only
where radio operator must have the knowledge to control the user’s exposure conditions for
satisfying the higher exposure limit allowed for occupational use.
When transmitting, hold the radio in a vertical position with its microphone 2 inches (5 cm)
away from your mouth.
The radio is transmitting when the red LED on the front of the radio is illuminated. You can
cause the radio to transmit by pressing the PTT bar on the radio.
These are required operating configurations for meeting FCC RF exposure compliance.
Failure to observe these restrictions mean violation.
Operating Instructions
About Your SP-200 series Radio
Maxon's SP-200 series radio feature up to 13 groups and up to 16 channel operation per group for a total channel capacity of 199
channels of superior performance and reliability. Operation and functions for Maxon's SP-200 series radios are described in this
manual.
We urge you to thoroughly read this manual before operating the radio.
Application of some of the functions described in this manual is determined by the system you use. Your Maxon Dealer will program
your radio so that you have the greatest number of functions possible relative to your needs.
Should you have questions regarding the operation of the radio please consult your Maxon Dealer.
About Maxon America, Inc.
Maxon America, Inc. designs and manufactures professional FM two-way radio equipment to serve a wide variety of communication
needs. Maxon produces equipment for the Land Mobile Radio and Specialized Mobile Radio markets (business, industrial,
government, and public safety).