User's Manual

9
Channel Group Edit: To edit the Group scan list in a radio programmed for channel group scan, turn radio
off, press and hold scan button, first button beneath the PTT button. While holding scan button turn radio
on, release the scan button after the first red flash of the LED and Scnl is shown in the display. Upon release
of the scan button the first group number will be displayed. If you do not wish to edit the group you have
selected press the button to select those channel groups you wish to edit. After channel group selection has
been made press and release the scan button, first button located beneath the PTT button, the channel
number within your selected channel group may now be edited. If channel number is flashing that channel is
already included in the scan list of the selected channel group. If channel number is solid that channel is not
included in the scan list To add or delete the selected channel to or from the scan list press and release the
monitor button, second button located beneath the PTT button. The selected channel will flash if selected
channel was added to the scan list or the selected channel will be solid if the selected channel was deleted
from the scan list. To edit other channels press the buttons to select the desired channel within the channel
group to be added or deleted from the channel group scan list and repeat the process. Upon completion of
adding or deleting channels to or from your channel group scan list press and release the scan button, first
button located below the PTT button. your new channel group scan list should be entered at this time.
Priority Channel Edit: Only one priority channel can be programmed into the radio. To edit a priority
channel, turn radio off, press and hold scan button, first button beneath the PTT button. While holding scan
button turn radio on, release the scan button after the second red flash of the LED and Pscn is shown in the
display. Upon release of the scan button the first channel number will be displayed. If displayed channel is
not your desired channel to be the priority channel press and release the buttons to select the desired
channel to become the priority channel. After you have selected the desired channel if the channel number is
flashing that channel is already selected as the priority channel. If channel number is solid that channel is
not selected as the priority channel. To add or delete the selected channel as the priority channel press and
release the monitor button, second button located beneath the PTT button. The selected channel will flash if
selected channel was added as a priority or the selected channel will be solid if the selected channel was
deleted as the priority. Upon completion of adding or deleting the priority channel press and release the
scan button, first button located below the PTT button, your new priority channel should be entered at this
time.
Licensing and Service Information
FCC Licensing
The Federal Communications Commission requires that the operator of this radio be properly licensed
under the applicable Part and/or Parts of the FCC Rules and Regulations.
Consult with your Maxon Dealer, or contact the nearest FCC Field Office for information about obtaining a
license.
Service
Do not tamper with internal adjustments. Damage to the equipment and/or improper operation may result.
There are no user serviceable items inside the radio.
It is recommended that you return your radio to a qualified Maxon Dealer for any service or repairs.
Recycling/Disposal of Batteries
The U.S. Environmental Protection Agency (EPA) classifies used Ni-Cd batteries as hazardous waste,
unless certain exemptions apply.
The battery should be recycled at the end of its useful life. Under various state or local laws, such batteries
must be recycled or disposed of properly and cannot be dumped in landfills or incinerators.
Maxon America, Inc. fully endorses and encourages the recycling of Ni-Cd batteries. A national program to
collect and recycle used Ni-Cd batteries is being implemented by the Rechargeable Battery Recycling
Corporation (RBRC Ö). This program is being funded through the use of license fees paid by the battery
and product manufacturers to place the RBRCÖ Seal on the batteries.
The following is a list of facilities where the batteries can be shipped to be recycled. Contact these facilities
for proper packaging and shipping guidelines.