User's Manual

8
Scan List Edit
You as a user can edit your radio’s scan list and priority scan channel at anytime form your radios original
program.
Your radio may have been programmed for channel only scan operation or channel Group scan operation
this operation was determined by your Dealer programming. Please note, if your radio has been
programmed for channel only scan you will not be able to edit your scan list. You will be able to edit your
priority channel.
Channel Only Edit: To edit the scan list in a radio programmed for channel only scan, turn radio off, press
and hold scan button, first button beneath the PTT button. While holding scan button turn radio on, release
the scan button after the first red flash of the LED and SE is shown in the display. Upon release of the scan
button the first channel number will be displayed. If channel number is flashing that channel is already
included in the scan list. If channel number is solid that channel is not included in the scan list To add or
delete the selected channel to or from the scan list press and release the monitor button, second button
located beneath the PTT button. The selected channel will flash if selected channel was added to the scan
list or the selected channel will be solid if the selected channel was deleted from the scan list. To edit other
channels press the buttons to select the desired channels to be added or deleted from the scan list and
repeat the process. Upon completion of adding or deleting channels to or from you r scan list press and
release the scan button, first button located below the PTT button, your new scan list should be entered at
this time.
( Remove entire statement)
Channel Group Edit: To edit the Group scan list in a radio programmed for channel group scan, turn radio
off, press and hold scan button, first button beneath the PTT button. While holding scan button turn radio
on, release the scan button after the first red flash of the LED and SE is shown in the display. Upon release
of the scan button the first group number will be displayed. If you do not wish to edit the group you have
selected press the button to select those channel groups you wish to edit. After channel group selection has
been made press and release the scan button, first button located beneath the PTT button, the channel
number within your selected channel group may now be edited. If channel number is flashing that channel
is already included in the scan list of the selected channel group. If channel number is solid that channel is
not included in the scan list To add or delete the selected channel to or from the scan list press and release
the monitor button, second button located beneath the PTT button. The selected channel will flash if
selected channel was added to the scan list or the selected channel will be solid if the selected channel was
deleted from the scan list. To edit other channels press the buttons to select the desired channel within the
channel group to be added or deleted from the channel group scan list and repeat the process. Upon
completion of adding or deleting channels to or from you r channel group scan list press and release the
scan button, first button located below the PTT button., your new channel group scan list should be
entered at this time.
Priority Channel Edit: Only one priority channel can be programmed into the radio. To edit a priority
channel, turn radio off, press and hold scan button, first button beneath the PTT button. While holding scan
button turn radio on, release the scan button after the second red flash of the LED and PE is shown in the
display. Upon release of the scan button the first channel number will be displayed. If displayed channel is
not your desired channel to be the priority channel press and release the buttons to select the desired
channel to become the priority channel. After you have selected the desired channel if the channel number
is flashing that channel is already selected as the priority channel. If channel number is solid that channel
is not selected as the priority channel. To add or delete the selected channel as the priority channel press
and release the monitor button, second button located beneath the PTT button. The selected channel will
flash if selected channel was added as a priority or the selected channel will be solid if the selected channel
was deleted as the priority. Upon completion of adding or deleting the priority channel press and release
the scan button, first button located below the PTT button., your new priority channel should be entered at
this time.