Datasheet

maxon gear
348
A-max 26 205-212 65.4 65.4 67.9 67.9 70.4 70.4 72.9 75.4 75.4
A-max 26 206-212 MEnc 13 410 72.5 72.5 75.0 75.0 77.5 77.5 80.0 82.5 82.5
A-max 26 206-212 MR 392 74.2 74.2 76.7 76.7 79.2 79.2 81.7 84.2 84.2
A-max 26 206-212 Enc 22 398 79.8 79.8 82.3 82.3 84.8 84.8 87.3 89.8 89.8
A-max 26 206-212 HED_ 5540 400/402 83.8 83.8 86.3 86.3 88.8 88.8 91.3 93.8 93.8
A-max 32 213/215 83.6 83.6 86.1 86.1 88.6 88.6 91.1 93.6 93.6
A-max 32 214/216 82.2 82.2 84.7 84.7 87. 2 87. 2 89.7 92.2 92.2
A-max 32 214/216 MR 393 93.4 93.4 95.9 95.9 98.4 98.4 100.9 103.4 103.4
A-max 32 214/216 HED_ 5540 400/402 103.0 103.0 105.5 105.5 108.0 108.0 110.5 113.0 113.0
RE-max 21 223/224 49.6 49.6 52.1 52.1 54.6 54.6 57.1 59.6 59.6
RE-max 21, 3.5 W 224 MR 389/391 54.7 54.7 57. 2 57. 2 59.7 59.7 62.2 64.7 64.7
RE-max 21 225/226 52.2 52.2 54.7 54.7 57. 2 57. 2 59.7 62.2 62.2
RE-max 21, 6 W 226 MR 389/391 56.5 56.5 59.0 59.0 61.5 61.5 64.0 66.5 66.5
EC 32 flat, 15 W 296 38.6 38.6 41.1 41.1 43.6 43.6 46.1 48.6 48.6
EC 32 flat, IE, IP 00 297 48.7 48.7 51.2 51.2 53.7 53.7 56.2 58.7 58.7
EC 32 flat, IE, IP 40 297 50.4 50.4 52.9 52.9 55.4 55.4 57.9 60.4 60.4
M 1:2
110451 110452 110453 110454 110455 110456 110457 110458 110459
6 : 1 10 : 1 18 : 1 30 : 1 60 : 1 100 : 1 200 : 1 500 : 1 900 : 1
6 10 18 30 60 100 200 500 900
3 3 3 3 3 3 3 3 3
2 2 3 3 4 4 5 6 6
0.1 0.1 0.2 0.2 0.3 0.3 0.6 0.6 0.6
0.3 0.3 0.6 0.6 0.9 0.9 1.8 1.8 1.8
= =
≠ ≠
= =
≠
= =
81 81 73 73 66 66 59 53 53
55 55 60 60 65 65 70 75 75
1.0 1.0 1.5 1.5 2.0 2.0 2.5 3.0 3.0
0.7 0.6 0.4 0.4 0.3 0.3 0.2 0.2 0.2
20.6 20.6 23.1 23.1 25.6 25.6 28.1 30.6 30.6
maxon gear April 2016 edition / subject to change
Stock program
Standard program
Special program (on request)
overall length
overall length
maxon Modular System
+ Motor Page + Sensor/Brake Page Overall length [mm] = Motor length + gearhead length + (sensor/brake) + assembly parts
Technical Data
Spur Gearhead straight teeth
Output shaft stainless steel
Bearing at output sleeve bearing
Radial play, 12 mm from flange max. 0.1 mm
Axial play 0.03–0.2 mm
Max. axial load (dynamic) 30 N
Max. force for press fits 500 N
Max. continuous input speed 5000 rpm
Recommended temperature range -5…+80°C
Number of stages 1 2 3 4 5
Max. radial load, 12 mm
from flange 50 N 50 N 50 N 50 N 50 N
Spur Gearhead GS 38 A ∅38 mm, 0.1–0.6 Nm
Part Numbers
Gearhead Data
1 Reduction
2 Absolute reduction
3 Max. motor shaft diameter mm
4 Number of stages
5 Max. continuous torque Nm
6 Max. intermittent torque at gear output Nm
12 Direction of rotation, drive to output
7 Max. eciency %
8 Weight g
9 Average backlash no load °
10 Mass inertia gcm
2
11 Gearhead length L1* mm
*for EC 32 flat L1 is + 2.0 mm
1608_Gear.indd 348 22.04.16 14:53