user manual

HSDPA Standard At Commands Page 24 of 60 Version 1.2
+CCFC Mand. Call forwarding number and conditions NA
+CCWA Opt. Call waiting NA
+CHLD Opt. Call related supplementary services NA
+CTFR Opt. Call deflection Not supported
+CUSD Opt. Unstructured supplementary service data NA
+CAOC Opt. Advice of Charge NA
+CSSN Opt. Supplementary service notifications NA
+CLCC Opt. List current calls NA
+CPOL=[<index>
][,
format>[,<oper>]]
Opt.
Preferred operator list Parameter values supported:
 <index> – 0 to 50
 <format> – 0,2
Supported
+CPLS Opt. Selection of preferred PLMN list Not supported
+COPN Opt. Read operator names Supported
+CAEMLPP Mand. eMLPP Priority Registration and Interrogation Not supported
+CPPS Mand. eMLPP subscriptions Not supported
+CFCS Mand. Fast call setup conditions Not supported
+CAAP Mand. Automatic answer for eMLPP Service Not supported
+CUUS1 Opt. User to User Signalling Service 1 Not supported
1.18. Subscriber number +CNUM
Action command returns the MSISDNs related to the subscriber (this information can be stored
in the SIM/UICC or in the MT). When storing information in the SIM/UICC, if a SIM card is
present or if a UICC with an active GSM application is present, the information is stored in the
EF
MSISDN
under DF
Telecom
. If a UICC with an active USIM application is present, the information is
stored in the EF
MSISDN
under ADF
USIM
). If subscriber has different MSISDN for different services,
each MSISDN is returned in a separate line.
Table 14. +CNUM action command syntax
Command Possible response(s)
+CNUM +CNUM: [<alpha1>],<number1>,<type1>[,<speed>,<service>[,<itc>]]
[<CR><LF>+CNUM: [<alpha2>],<number2>,<type2>[,<speed>,<service>
[,<itc>]]
[...]]
+CME ERROR: <err>
+CNUM=?
1.19. Network registration +CREG
Action command returns the MSISDNs related to the subscriber (this information can be stored
in the SIM/UICC or in the MT). When storing information in the SIM/UICC, if a SIM card is
present or if a UICC with an active GSM application is present, the information is stored in the
EF
MSISDN
under DF
Telecom
. If a UICC with an active USIM application is present, the information is
stored in the EF
MSISDN
under ADF
USIM
). If subscriber has different MSISDN for different services,
each MSISDN is returned in a separate line.