User's Manual
Table Of Contents
Alerts
20
To Set the Call Tone
1. With the radio on, press
\ until E appears in the upper right portion of
the display.
Current Call Tone setting will begin to flash.
2. Press
[ and ] to change and hear Call Tone while flashing.
3. Press
\ or
M
to set new Call Tone.
• T5800 has 5 Call Tones
• T5820 has 10 Call Tones
• Setting the Call Tone to
0 disables the Call Tone function.
Roger Beep/Talk Confirmation Tone
When you turn on this feature, your two-way radio transmits a unique tone when you
finish transmitting. It’s like saying “Roger” or “Over” and lets others know you’re
finished talking.
• To enable Roger Beep/Talk Confirmation Tone, press and hold
] as you turn
your radio On. Now, when you release the
M
button, your set tone lets your
friends know you’re finished talking and
!will appear on the display.
• To disable the Talk Confirmation Tone feature, turn your radio Off and then back
On while pressing and holding
].
6864110r06o.book Page 20 Tuesday, March 5, 2002 5:00 PM