User manual

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
45
NOTE: Perform this step only if the
mounting bracket fi ts too tightly
in the stop block (FIG. 45-1).
38. If LH mounting bracket fi ts too tight
against either side of stop block
FIG. 45-1, adjust with spacers as
shown in FIG. 45-2.
REAR VIEW OF LH RUNNER
FIG. 45-1
FRONT VIEW OF LH RUNNER
FIG. 45-2
MOUNTING BRACKET
STOP BLOCK
STOP BLOCK
1/16” SPACER
1/32” SPACER
HEX HEAD SCREW, 5/8”-11 X 2” LG.
HEX HEAD SCREW,
5/8”-11 X 1-1/4” LG.
(2 PLACES)
LOCK WASHER
(2 PLACES)
LOCK NUT
(2 PLACES)
FLAT WASHER
(2 PLACES)
FLAT WASHER
(2 PLACES)