User manual

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
46
STOP BLOCK
MOUNTING BRACKET
REAR VIEW OF RH RUNNER
FIG. 46-1
FRONT VIEW OF RH RUNNER
FIG. 46-2
1/16” SPACER
1/32” SPACER
STOP BLOCK
HEX HEAD SCREW,
1/2”-13 X 1-1/2” LG.
(3 PLACES)
LOCK WASHER
(2 PLACES)
NOTE: Perform this step only if the
mounting bracket fi ts too tightly
in the stop block (FIG. 46-1).
39. If RH mounting bracket fi ts too tight
against either side of stop block
FIG. 46-1, adjust with spacers as
shown in FIG. 46-2.
REPLACING PARTS
RUNNER REPLACEMENT - Continued