11.0

CINEMA 4D R11 Quickstart – XPresso

Connect the “Cylinder_small“ “Position.Y“ output to the “Mix“ node’s input 1 and the “Cylinder_big“ exit to

the “Mix“ node’s input 2.

Both Y-positions will now be transmitted to the “Mix“ node which will now calculate their average of their

respective values. The 50% setting makes sure the values will be mixed evenly. The result will be the Y-position

of the medium cylinder. Click on the blue corner of the “Cylinder_medium“ node and open an input for the

Y-position (Coordinates / Position / Position.Y). Connect the “Mix“ node’s output with the input of “Cylinder_

medium“ node.

Now gaze in amazement at the result in the editor window. Move the small cylinder along its green Y-axis. The

center cylinder aligns itself automatically.