9.5.2

94 • CHAPTER 3
CONFIGURATION • 95
 Open the scene in MOTIONBUILDER.
 Open a Navigator window.
 Expand the character’s tree.
 Double-click on the Gaulix character.
 On the Character Settings tab, do the following:
- Disable the Active option to disable the character constraint.
- If necessary, enable the Active option again.
 Save your corrected scene.
“This will update the TRS values of the nodes of Gaulix with the ones in the character constraint. The
problem we have here was present only in the samples of MOTIONBUILDER 4.0. Any scene created
before or after that release does not contain this problem.”
Additional options
Import Poses/PLA
If the FBX le contains poses, this option controls whether the poses should be evaluated and, for
example, imported as PLA.
Use PoseMizer
If the optional MOCCA module is installed, poses can be imported using MOCCA’s PoserMixer tool.
The Import Poses/PLA option must also be enabled.
Import Normals
This refers to point normals that are stored in a tag. Enabling the option can result in better rendering
results when importing mesh from other 3D applications.
Smart Merge Updates Weights
Enable this option to import weights created in another 3D application.
Key lters for translation, rotation and scale
These threshold values control when similar keys will be merged. At 0%, only identical keys will be
removed. At 100% the importer will remove as many keys as possible within certain limits.