9.5.2

224 • CHAPTER 7
OBJECTS MENU • NURBS • 225
Extrude NURBS
The Extrude NURBS object extrudes a spline to create an object with depth. The extruded object
appears as soon as you drop the spline into the Extrude NURBS in the Object manager. You can also
use splines to cut out holes. If, for example, a single spline object has two segments (an outer circle
and an inner circle), the inner circle will be interpreted as a hole. CINEMA 4D detects hole splines
automatically.
All segments must be contained within a single spline object — additional
splines will be ignored. To connect the splines, select them and choose
Functions > Connect.
Before extrusion (left) and after extrusion (right).
Attribute manager settings
Object Properties
Movement
Into these three input boxes, enter the extrusion distance along the X, Y and Z-axes (based on the
local axis system of the NURBS object).
Subdivision
Denes the number of subdivisions along the extrusion axis.
Iso Subdivision
Denes the number of isoparms used to display the Extrude NURBS when the isoparm display mode is
active.