9.5.2

338 • CHAPTER 7
OBJECTS MENU • LIGHTING • 339
Details
Using the Details tab, you can access the individual properties of each of your light sources.
Use Inner, Inner Angle
Use Inner disabled. Inner Angle set to 0.
Depending on the type of light you use, this will adjust either the Inner Angle (for a standard Spotlight)
or the Inner Radius (for a Parallel Spotlight) of the light. Within the Inner Angle area, the luminosity
value of the light source is 100%. From the Inner to the Outer Angle the luminosity value falls from
100% to 0%.
If Use Inner is disabled, the luminosity of the light source in the entire light cone amounts to 100%,
resulting in a hard cone of light. If the Inner Angle has a value of 0, the light source will have a soft
transition spreading from the center of the light to the light’s edge.