Manualshelf

9.5.2

ManualsBrandsMaxon ManualsApplicationsCinema 4D
401402403404405406407408409410
Table Of Contents
370 • CHAPTER 7
OBJECTS MENU • LIGHTING • 371
Position
This value sets the positioning of the element on the screen. The axis on which all reections lie travels
through two points: the light source, and the center of the screen (which is also the center of the lens).
Here the following values apply.
0% = light source
50% = screen center
100% = 2 x distance light source center
Negative values place the reections behind the light source.
Size
This value determines the size of the element. The radius is shown as a percentage, where 100% is the
distance from the center of the screen to the edge.
Color
Select the color for the element.
Scene
Here you can choose which objects will be affected by the light. Drag and drop the objects from the
Object manager into the Objects box.
Mode
If the light should illuminate specic objects only, set Mode to Include and drag the names of the
objects that should be lit by the light from the Object manager into the Objects box. If the light should
be switched off for specic objects, set Mode to Exclude and drag the names of these objects from
the Object manager into the Objects box.