9.5.2

452 • CHAPTER 7
OBJECTS MENU • DEFORMERS • 453
Wrap
Cylindrical wrap. Spherical wrap.
Determines whether the recipient is wrapped around a sphere or a cylinder.
Longitude Start, Longitude End
These angles dene the horizontal span of the curved surface. If Start is set to 180° and End to 360°,
the curved surface forms half of the cylinder or sphere in the horizontal direction.
Latitude Start, Latitude End
These angles dene the vertical span of the spherical surface. If Start is set to -45° and End to 45°, the
curved surface forms the middle half of the sphere in the vertical direction.
Movement
You can use this value to specify a movement in the Y direction. This causes the object to wrap in a
spiral fashion. You can use a positive value to spiral up or a negative value to spiral down.
Scale Z
Use this value to simulate the attening that usually happens when a real-life exible object is
stretched. If you enter 50% instead of 100%, the object will be attened by 50% in the Z direction.
You can enter values greater than 100% if you would like the object to expand on wrapping.