9.5.2

588 • CHAPTER 10
STRUCTURE MENU • 589
Var (Offset)
Var 0%. Var 60%.
Varies the length of the extrusion. This option is not available if Preserve Groups is enabled. The value
you enter is subtracted from 100% to give the start of the variation range.
0% - No deviation from the selected offset value.
60% - All selected polygons are extruded between 40% and 100% of the
Offset value.
100% - All selected polygons are extruded between 0% and 100% of the
Offset value.
180% - All selected polygons are extruded between -80% and 100% of the
Offset value.
Subdivision
Subdivision set to 0 (left) and 3 (right).
Denes the number of subdivisions along the extrusion.
Create N-gons
If this option is enabled, n-gons will be created along the length of the extrusion. Although you won’t
see edges along the length of the extrusion, the Subdivision setting is still applied internally.