User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
207
Changing The RTU Communications Port
The example below shows how to use CP-xx port 2 as the primary port and MC-11 port 2 (RTU port 5) as
the secondary port. The network list is initially configured with a direct network link to RTU7 via port 2.
CP11
MC11
Port 2
RTU1
Primary
Secondary
Port 5
CP11
RTU7
RADIO
RADIO
RADIO
│ │
├Manage Comms Status ┼ ┼ ┼ ┤
│ │
│Prim Waiting Primary Fail │
│ #YPST2.2 #R20.1 │
├─[DOWN-EDGE]────────────────────────────────────────────────────────(Copy)────┤
│ #YLST7.1 │
│Sec Waiting Second Fail │
│ #YPST5.2 #R20.2 │
├─[DOWN-EDGE]────────────────────────────────────────────────────────(Copy)────┤
│ #YLST7.1 │
│ │
│ │
├Test Other Comms Link every 10 minutes or if secondary fails ┤
│ │
│DoEvery10min Swap Links │
│#YTICK.10MIN #R20.3 │
├─────┤ ├─────────────────┬──────────────────────────────────────┬─────(S)─────┤
│ │ │ │
│Sec Waiting Second Fail │ │Test Comms │
│ #YPST5.2 #R20.2 │ │ #R20.4 │
├─[DOWN-EDGE]──────┤ ├────┘ ┼ ┼ └─────(S)─────┤
│ │
│ │
│ │
├Change links if testing, primary fails or prim OK and link = sec ┤
│ │
│Sec Waiting Prim Waiting Swap Links Link=Primary Swap Links │
│ #YPST5.2 #YPST2.2 #R20.3 #YLVIA7 #R20.3 │
├─────┤/├──────────┤/├──────────┤ ├────┬─────[=]─────────────────┬─────(R)─────┤
│ │ 2 │ │
│Prim Waiting Primary Fail │ │Link=Second │
│ #YPST2.2 #R20.1 │ │ #YLVIA7 │
├─[DOWN-EDGE]──────┤ ├─────────────────┘ ┼ └───(Copy)────┤
│ 5 │
│Sec Waiting Prim Waiting Swap Links Link=Second Swap Links │
│ #YPST5.2 #YPST2.2 #R20.3 #YLVIA7 #R20.3 │
├─────┤/├──────────┤/├──────────┤ ├────┬─────[=]─────────────────┬─────(R)─────┤
│ │ 5 │ │
│Prim Waiting Primary Fail Test Comms │ │Link=Primary │
│ #YPST2.2 #R20.1 #R20.4 │ │ #YLVIA7 │
├─[DOWN-EDGE]──────┤/├──────────┤/├────┘ ┼ └───(Copy)────┤
│ 2 │
│ │
│ │
├If the Test Comms flag is set and ports are free test the link ┤
│ │
│Test Comms Sec Waiting Prim Waiting Test Link │
│ #R20.4 #YPST5.2 #YPST2.2 RTU 7 │
├─────┤ ├──────────┤/├──────────┤/├──────────────────────────────┬──(RX_DATA)──┤
│ │ #R1 │
│ │Test Comms │
│ │ #R20.4 │
├ ┼ ┼ ┼ ┼ └─────(R)─────┤
│ │