User manual
Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
2
Document Information
Document Control
Copyright
Copyright CSE-Semaphore (Australia) Pty Ltd. ABN 35 006 805 910
www.cse-semaphore.com/mykingfisher, info.kingfisher@cse-semaphore.com
Intellectual Property
CSE-Semaphore asserts ownership of the intellectual property contained herein and claims
copyright and authorship. CSE-Semaphore has and retains all rights of ownership and use of
the material herein in its on-going business.
Licence
This document is provided to the intended recipient(s) under a non-exclusive licence. This
licence permits Fair Use of the document for operational requirements, without payment of
further royalty or licence fee. Fair Use includes making copies of the document for operational,
backup and archive purposes. Fair Use includes distributing copies of the document to other
entities for the purposes of their performing related works for the intended recipient(s). Fair Use
does not include creating, selling or distributing copies of the document for other purposes. All
copies must retain this statement of Intellectual Property and Copyright.
Revision History
Rev.* Date Summary
1.50a 19/3/2009
First release.
1.50b 11/6/2009 Update to ON/OFF voltage levels for digital inputs.
1.50b-2
17/9/2009
Added note to use 3 wires for RS485. Added ADP-05 wiring. Added note about 0-20 or 4-20 mA
analog inputs. Updated Supply Voltage engineering units range.
1.50b-3
12/11/2009
Added Analog Input and Analog Output accuracy.
1.50c 17/12/2009
LP-2/3 can now wake up on change of state of digital input 1 or 2. LED flashes every 2 seconds
when LP-2/3 is sleeping.
1.50c-2
9/9/2010
Updated supported option boards in the Communications Ports topic. Updated labeling of RJ45
pin numbers to conform to the international standard. Moved Port Pinouts chapter to
Specifications chapter. Added Backup Battery Calculations chapter. LED flashes every 4
seconds when in sleep mode. Only port 1 CTS change can wake the RTU from sleep. Updated
power consumption figures. Added read/write note for each data register. Updated Low Power
Operation example.
1.50c-3
18/6/2012 Updated Analog inputs to reflect correct temperatures with supplied thermocouple.
* Revision number corresponds to the LP-2/3 firmware version.