User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
25
Mounting Details
185
130
153
90
15
16
IO Connector
The LP-2/3 RTU has a two part enclosure comprised of a plastic
base and a cover. The overall dimensions of the LP-2/3 RTU are
185 mm H x 130 mm W x 50 mm D. The enclosure includes room
behind the circuit board to allow the housing of third party
devices. Available space is approximately 160 mm H x 120 mm
W x 20 mm D.
The LP-2/3 enclosure is mounted by fastening 4 screws (up to
3.5 mm in diameter) through the base plate. Once the base plate
is mounted, the cover of the LP-2/3 is then attached.
Dimensions
Enclosure overall size 185 mm H x 130 mm W x 50 mm D
Enclosure cavity (for OEM device) 160 mm H x 120 mm W x 20 mm D