User manual
User Manual PM200
Page 6
English
PM200 Features & Description
2W or 25W Programmable output power
208 Programmable Channels
D-SUB 15Pin Data Connector
Programmable 12.5 /25 KHz Channel Spacing
Channel Scan
Priority Channel Scan
Look Back Channel
Scan List Edit
Priority Channel Edit
CTCSS/DCS/DTMF tone signalling
Busy Channel Lock-out
Mark Idle
Time out timer
Public Address
SELCALL
Stun and Revive
Covert Mode
ANI
SELCALL Messaging
Acknowledge
Key Lock
Start up Definable Logo
Auto Mute
Back Light Display
SMS
DTMF
HOOK Switch
Product Description
The PM200/250 is a fully featured mobile radio that has been developed for the European
market. The PM200/250 is a DTMF, Selcall and SMS mobile radio with a 208-channel capability.
The radio is programmable for output power, channel spacing, and a range of other features.
The PM200 mobile radios are packed full of sophisticated user and system features which allow
the radios to be tailored to meet the requirements of most radio networks today.
All the features described are made available thanks to the latest reliable, but functionally rich,
software that controls each PM200 mobile. This means that all features described are available
without the need to fit expensive and time consuming option boards.
Most of the features or options described are activated in the radio as programmable parameters;
please contact your dealer for full details on these options.
The PM200 is a DTMF, SECALL and SMS mobile radio with 208-channel capability. The radio is
programmable for output power, channel spacing, and a range of features. The three buttons
located on the bottom left-hand side of the radio under the LCD, are described as programmable.
These three buttons (P1, P2, and P3) have a short and long press and can be used for various
pre- programmed features, Monitor, Power H/L, Scan, DTMF, Key lock, Selcall, Scan, Public
Address, Open Close, 1200/2400, SMS and Light. The range does conform to R+TTE Directive.
The unit meets the R+TTE Directive ETS 300.086 2001.
Feature List