Installation manual

38
11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
1. Liftgate and additional
battery box are typically
installed on trailers as
shown in FIG. 38-1 and
on trucks as shown in
FIG. 38-2. See the fol-
lowing page for battery
and cable connections.
LIFTGATE
ADDITIONAL BATTERY BOX
- TYPICAL LOCATION
RECOMMENDED LIFTGATE & BATTERY BOX
INSTALLATION ON TRAILER
FIG. 38-1
TRAILER-MOUNTED
CIRCUIT BREAKER,
ADDITIONAL RECOM-
MENDED LOCATION
CIRCUIT
BREAKER
POWER CABLE
(200 AMP IN-LINE
FUSE SHOWN)
CHARGE LINE
TRACTOR BATTERY
CIRCUIT BREAKER -
REQUIRED LOCATION
LIFTGATE
ADDITIONAL BATTERY BOX
- TYPICAL LOCATION
LIFTGATE
POWER UNIT
RECOMMENDED LIFTGATE & BATTERY BOX
INSTALLATION ON TRUCK
FIG. 38-2
CIRCUIT
BREAKER
POWER CABLE
(200 AMP IN-LINE
FUSE SHOWN)
CHARGE LINE
TRUCK BATTERY
CIRCUIT BREAKER -
REQUIRED LOCATION
TRACTOR BATTERIES
- TYPICAL LOCATION
TRUCK BATTERIES
- TYPICAL LOCATION
RECOMMENDED LIFTGATE POWER CONFIGURATION
NOTE: Make sure the Liftgate power unit, and all batteries on the vehicle for the
power unit, are connected correctly to a common chassis ground.
LIFTGATE
POWER UNIT