Specifications

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
15
PATENTS PENDING
LIFT THRESHHOLD
FIG. 15-1A
HEIGHT ADJUSTMENT SCREW
(RH SIDE SHOWN)
FIG. 15-1B
ADJUSTMENT
SCREW
HEIGHT ADJUSTMENT SCREWS
FIG. 15-2
3. Set edge of the Threshhold Plate
to 5/8” height by turning the ad-
justment screw on the RH Side of
Threshhold plate (FIG. 15-1B).
Turn adjustment screw counter-
clockwise (FIG. 15-2) to raise
Threshhold Plate or clockwise
to lower. Repeat for LH Side of
Threshhold Plate. Alternately
measure height (see step 2) and
turn the adjustment screw on RH
Side and LH Side until the entire
edge of Threshhold plate is at the
5/8” height.
CCW - RAISE CW - LOWER