Specifications

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
20
PATENTS PENDING
2. Open the release valve (FIG. 20-1)
counter-clockwise with the Backup
Pump Handle. As the Lift starts to
unfold and rests against the latches
(FIG. 20-2), close the release
valve (FIG. 20-1) by turning clock-
wise.
USING BACKUP PUMP TO UNFOLD
(LIFT WITH LH PUMP)
FIG. 20-1
LIFT RESTING ON
LATCHES
FIG. 20-2
NOTE: After pressure release valve is
opened, you have 5 minutes
to do the adjustment before
the Controller repressurizes
hydraulic system and stows
the Lift.
RELEASE
VALVE
BACKUP PUMP
HANDLE
NOTE: The STOW switch adjustment
screw is always on the same
side of the Lift as the Pump
Cover (FIG. 20-3).
RH PUMP
LH PUMP
ADJUSTMENT
SCREW
WHERE TO FIND ADJUSTMENT SCREW
FIG. 20-3
STOW SWITCH ADJUSTMENT - Continued