Installation Notes

PARKING AIR HEATER
16
Fig.7
Installation position: truck
In a truck, the heater should preferably be installed inside the
driver’s cab. If this is not possible, it can also be mounted in
the tool box or in a storage box. Please refer to Fig.7.
Fig.8
Installation position: RV
In an RV, the heater should preferably be installed in the inner
compartment or luggage compartment. If this is not possible,
the heater can also be mounted, protected against water
splashes, under the vehicle floor. Please refer to Fig.8.
Fig.9
Installation position: car or people carrier
The heater should preferably be installed in the passenger
compartment or boot (trunk). If this is not possible, it can also
be mounted, protected against water splashes, under the
vehicle floor. Please refer to Fig.9.
Fig.10
Installation position: excavator cab
In an excavator, the heater should preferably installed in the
cab. If this is not possible, the heater can also be installed in a
storage box outside the cab. Please refer to Fig.10.
PARKING AIR HEATER
15
5.1 Installation of Main Device
5.1.1 Installation position
The main device can be installed inside or outside of the
vehicle. However, when it is installed outside the vehicle, a
shield (not included) to prevent damage due to external
forces (eg stone damage) should be provided. The heater
must not be immersed in water or exposed to rain. If the
heater suffers corrosion due to rain or other water, immedi-
ately cease using it and have all of its components inspected
by a qualified technician.
Model MXR-2Y & MXR-3M（All-in-one style）have two
power supply methods: car battery and DC 12V(AC/DC
adaptor optional)，pls refer
Fig.6.
Only one power supply method can be used at a time, CANNOT
be used at the same time.