User Manual

Two Year Warranty
Electronics:
A full Two Year On-site Warranty (Continental U.S.)
Battery:
A full One Year Warranty, 10-year pro-rated,
on the Battery System ensures that your batteries
are protected from system failure now and in the
future. (Warranty provided by battery manufacturer.)
Extended warranties, customized service plans and
preventative maintenance are also available. Please
refer to our warranty statement for complete details.
Staco Energy Products Co.
Staco FirstLine PL UPS Technical Specications
UPS Rating kVA/kW 10/9 15/13.5 20/18 30/27
40/36
Input
Topology On-Line Double Conversion
Voltage 208Y/120 VAC, Three Phase, 4 wire plus ground or 220Y/127 VAC configurable from the Front Panel
Range +15% / -20% Battery Discharge@-15% with full load
Frequency 60/50Hz +/- 5.0 Hz
Power Factor 0.99 at 100% load, 0.98 minimum at 50% load
Current Distortion (THD) <1% @100% Load, <2% @ 50% Load, <5% @ 10% Load
Input Current (A)
Nominal: 28
Maximum: 33
Nominal: 42
Maximum: 49
Nominal: 55
Maximum: 65
Nominal: 83
Maximum: 97
Nominal: 111
Maximum: 130
Input Current Inrush Walk-In from 25% maximum to 100% full load rating in 5 seconds
Output
Voltage 208Y/120 VAC, Three Phase, 4 wire plus ground or 220Y/127 VAC configurable from the Front Panel
Static Voltage Regulation +/- 2%
Voltage Transient Response
Voltage transient response shall not exceed the following, and shall recover to 95% within 10 milliseconds:
a) +/- 15% at the first cycle for a 100% step load b) +/- 1% (loss or return of AC input)
Frequency
(inverter synchronous)
60/50Hz (tracks frequency of static bypass source) +/- 0.5, 1.0, 2.0, 5.0 Hz (user settable)
Frequency Slew Rate (inverter
synchronized to static bypass)
± 10 Hz per second
Free Running Frequency
(on battery or asynchronous)
60/50Hz +/- 0.01Hz
Voltage Distortion THD Less than 1% (Linear load), less than 2% with crest factor 2.5 to 1
Inverter Overload 125% for 10 minutes, 150% for 60 seconds
Bypass Overload 400% for 10 seconds, 1000% for half line cycle
Bypass Input – Range
Synchronization Voltage
+12% / -15%
Bypass Input Frequency
Tracking Range
+/- 5Hz
Overall Efficiency Up to 94%
Output Current (A) 28 42 55 83
111
Heat Rejection (BTU/Hr) 3,412 5,118 6,824 10,237
13,649
Battery Run Time (minutes)
Internal Battery String
Model (-X)
(-1) 37, (-2) 18, (-3) 9 (-1) 21, (-2) 10, (-3) 4 (-1) 14, (-2) 6 (-1) 8
(-1) 4
Environmental
Altitude De-rate load capability above 1000 meters, 1% per 100 meters
Operating Temperature 40 °C Maximum
Audible Noise
@ 3 feet "A" weighted scale
61dBA 67dBA
Dimensions and Weights
H x W x D inches (mm)
41.7 (1059) x 20.3 (516) x 33 (838) 52 (1321) x 23.2 (589) x 33 (838)
- (X) model, Lbs. (kg)
-0, 410 (186) -1, 950 (431)
-2, 735 (334) -3, 630 (286)
-0, 585 (266)
-1, 1,125 (510)
-0, 585 (266)
-1, 1,185 (538)
Standard Communications
SNMP/WEB SNMP Card & UPS PowerView Pro Shutdown and Monitoring Software for Windows/Novell
Modbus Monitoring & Control via RS-485/RTU Protocol/Read Holding and Write Registersl
Options
Input/Output 480/480V (D or Y), 480V/208V (D or Y) with Transformer option
Standards
208V Model
UL listed to 1778, CUL to CSA C22.2, NEMA PE-1, ASME, ASA-C-39.1-1984, FCC Part 15 Subpart J Class B,
NEC, OSHA, IEEE587, ANSI C 62.41-1980, ISO9000
FirstLine PL 10-40kVA Models
PL Model kVA/kW Internal Battery Time (minutes)
FLP-010-0
10kVA/9kW
0
FLP-010-1 37
FLP-010-2 18
FLP-010-3 9
FLP-015-0
15kVA/13.5kW
0
FLP-015-1 21
FLP-015-2 10
FLP-015-3 3
FLP-020-0
20kVA/18kW
0
FLP-020-1 14
FLP-020-2 6
FLP-030-0
30kVA/27kW
0
FLP-030-1 8
FLP-040-0
40kVA/36kW
0
FLP-040-1 4
Note: Longer battery run time available
For Frequency Converter add -FC to PL Model Number.