Owner manual

Gamatronic Electronic Industries Ltd.

POWER

50 KVA, N.Am. Std. – User Guide, Release 1.9

5.11.1 Changing the Power+ output voltage

1. Press the Enter key to display the main menu, and then select SETUP:

1> SYSTEM 4> HISTORY 7> SETUP

2> UPS MODULE 5> BATTERY 8> STATIC SW

3> SELFTEST 6> ALARM 9> _____

NAVIGATE: <UP, DOWN> 1 SELECT: <ENTER>

Figure 44: Main menu

2. Enter the password. (The default password is pressing the "left-arrow" key eight times,

and then the Enter key:

[Main Menu > SETUP]

POWER+ System Setup

Type in Level-1 PASSWORD, THEN – ENTER

Your privilege will expire after 15 min.

PASSWORD:________

Figure 45: Level 1 password access

3. Select Module/s voltage:

[Main Menu > SETUP > (password) > Module conf.]

1. Num of phase 5.Output Adjust

2. Module/s frequency 6.Frequency Limits

3. Module/s voltage 7.DC Calibration

4. Update Vo/Fr/ph 8.AC Calibration

Figure 46: Module Config. setup menu

4. Use the ▲▼arrow keys to set the module/s voltage, press Ent, and then Esc:

[Main Menu > SETUP > (password) > Module conf. > Module/s voltage]

Module/s voltage 4: 118V

1: 110V 5: 120V

2: 113V 6: 125V

3: 115V (selected) 5: 130V

Figure 47: Setting the Module/s voltage