Owner manual

Gamatronic Electronic Industries Ltd.

POWER

50 KVA, N.Am. Std. – User Guide, Release 1.9

d. When the Internet Protocol (TCP/ITP Properties screen appears, click the Use the

following IP address button and enter IP address and Subnet mask in the

appropriate fields. Leave Default gateway blank. Make sure that the first three

groups of numbers in the IP address (192.212.118 in the above example) are the

same as those of the domain in which the UPS is installed, and that the last

number (31 in the above example) is different (it can be any number from 0 to

255, other than the one already assigned to the UPS).

e. Click OK twice to complete the network connection.

3. Open your browser on the laptop computer and enter the IP address of the System

Controller in the browser’s address field to verify that you can reach the Web server on

the System Controller. The system displays the main GMaCi screen, similar to the one

shown below.

Figure 73: Main Screen of built-in web server

5.15.5 Test Wing Option

If Wing has been installed in the UPS, this test is designed to check that it is working properly by

sending an SMS message through the Web interface of Wing to a specified phone number.