Specifications

27
isoelectric focusing system
The CSL-IEF system has been designed to perform all flat bed IEF
techniques, including wick-based electrophoresis with horizontal
and hand-cast IEF gels, and focusing with IPG strips. The unit
includes a large cooling platform which offers increased strip
capacity and active gel area. Uniform cooling of the platform is
achieved using a large ceramic plate that may be connected to
any standard chiller via quick-fit connecters for enhanced gel or
strip cooling. An optional rehydration tray is also available for
overnight rehydration of up to twelve IPG strips before use.
■ For IPG strip and IEF gel applications
■ Large cooling platform area
■ Pick and place easy to position electrodes
■ Grid for accurate electrode alignment
■ Rehydration tray also available
M AX STRIP LENGTH 26 CM
M AX GEL DIMENSIONS 26 X 26 CM
U NIT DIMENSIONS (W X D X H) 55 X 35 X 10 CM
Technical Specifications
CSL-IEF Flatbed IEF system for IEF strips and gels
CSL-CHILLER Chiller for Electrophoresis systems F250 Julabo Chiller
CSL-IEFPOS Replacement positive electrode
CSL-IEFNEG Replacement negative electrode
CSL-IEFPLT Replacement Glass platform
CSL-IEFFRME Replacement electrode frame
CSL-RHYDTRY
Rehydration Tray
Ordering Information
second stage 2-D
U NIT DIMENSIONS 36 X 33 X 18 CM (W X H X D)
P
LATE DIMENSIONS 30 X 22 CM (W X L)
G
EL DIMENSIONS 28 X 20 CM (W X L)
M
AX SAMPLE 300 SAMPLES PER RUN ; 75 SAMPLES PER GEL
B UFFER VOLUME M IN 1800 ML , M AX 8400 ML
C OMBS AVAILABLE
N O . OF TEETH 1, 2, 4, 28MC, 56MC, 75
T
HICKNESSES 0.25, 0.35, 0.5, 1, 1.5, 2.0 MM
Technical Specifications
VS30D omniPAGE Maxi Plus, 30 x 22cm Dual with Glass Plates with bonded 1.5mm spacers, 2 x 28 sample combs, 2 x 2-D combs, cooling pack, dummy plate
VS30DSYS VS30D with Casting Base
VS30BI omniPAGE VS30 Blot Maxi Insert - includes 3 cassettes and 6 fibre pads.
VS30DCAST 30 x 22cm Dual Casting Base
VS30DCASTMReplacement Silicone Mat for 30 x 22cm Casting Base
VS30DIRM Inner Running Module
VS30ICB Maxi Cooling Pack
VS30-x -LG Loading guides for omniPAGE maxi combs, x = comb well number
VS30NG 30 x 22cm Notched Glass Plates 4mm thick (pk/2)
VS30PG 30 x 22cm Plain Glass Plates 4mm thick (pk/2)
VS30NGS0.75 30 x 22cm Notched Glass Plates with 0.75mm Bonded Spacers (pk/2)
VS30PGS0.75 30 x 22cm Plain Glass Plates with 0.75mm Bonded Spacers (pk/2)
VS30NGS1 30 x 22cm Notched Glass Plates with 1mm Bonded Spacers (pk/2)
VS30PGS1 30 x 22cm Plain Glass Plates with 1mm Bonded Spacers (pk/2)
VS30PGS1.5 30 x 22cm Plain Glass Plates with 1.5mm Bonded Spacers (pk/2)
VS30PGS2 30 x 22cm Plain Glass Plates with 2mm Bonded Spacers (pk/2)
VS30DP Dummy Plate, 30 x 22cm
VS30S0.75 22cm Spacers - 0.75mm (pk/2)
VS30S1 22cm Spacers - 1mm thick (pk/2)
VS30S1.5 22cm Spacers - 1.5mm thick (pk/2)
VS30S2 22cm Spacers - 2mm thick (pk/2)
RPW-0.2100 Replacement Platinum Wire - 0.2mm, 100cm
Ordering Information
combs
1.0mm
1.5mm
Code Description
Sample Volume
per well
VS30-1-1 Comb 1 Prep, 1 Marker, 1mm thick 2250µl
VS30-2-1 Comb 2 sample, 1mm thick 1125µl
VS30-4-1 Comb 4 sample, 1mm thick 550µl
VS30-28MC-1 Comb 28 sample, 1mm thick MC compatible 80µl
VS30-56MC-1 Comb 56 sample, 1mm thick MC compatible 40µl
VS30-75-1 Comb 75 sample, 1mm thick MC compatible 25µl
Code Description
Sample Volume
per well
VS30-1-1.5 Comb 1 Prep, 1 Marker, 1.5mm thick 3375µl
VS30-2-1.5 Comb 2 sample, 1.5mm thick 1680µl
VS30-4-1.5 Comb 4 sample, 1.5mm thick 825µl
VS30-28MC-1.5 Comb 28 sample, 1.5mm thick MC compatible 120µl
VS30-56MC-1.5 Comb 56 sample, 1.5mm thick MC compatible 60µl
VS30-75-1.5 Comb 75 sample, 1.5mm thick MC compatible 37µl
Combs also available in other thicknesses and sample number, please enquire
Low cost, high specification
Chiller available for use
with CSL IEF flatbed unit.
■ Ideal for second dimension
electrophoresis
■ Accepts strips up to 26cm in
length
■ Rapid set up coolpacks for
enhanced resolution
The omniPAGE VS30 unit has been designed to provide a
convenient unit for the second stage of 2-D electrophoresis.
The 26cm active gel width provides a large gel area to resolve
large IEF strips. In combination with the IEF system above, this
offers a complete package for 2-D electrophoresis. The unit
utilises the omniPAGE advanced design features to provide
convenient ease of use with high resolution separations.
Rapid set up cooling retains resolution in extended separations
and also saves on buffer volume without affecting run quality.
Four gels can be resolved per run. A wide range of accessories
is available to allow easy transition between 2-D and standard
vertical electrophoresis techniques. In particular different types
of 2-D comb allow a wide degree of versatility in sample
selection and gel set-up.
For 110 V AC version Chiller, please add ‘-$’ as a suffix to the appropriate code