User's Manual

MaxStream, Inc. 24XStream Wireless Module Manual v2.8
16
The module will remain in Receive Mode until an error is detected in the received data, or no
more data is detected, at which point, the module transitions to Idle Mode. If serial data was
stored in the data buffer while the module was in Receive Mode, the data will be transmitted after
the module returns to Idle Mode.
Sleep Mode
Sleep Mode enables the 24XStream module to go into a low-power state where minimal power is
consumed when the module is not in use. Once in Sleep Mode, the module will not transmit or
receive data until it first returns to Idle Mode. To enter Sleep Mode, the module must be inactive
(no data transmission or reception) for a user-defined period of time (specified by the ST
command). After this time elapses, the module transitions to Sleep Mode. By default, Sleep
Mode is disabled and must be enabled using the SM command.
The 24XStream features several Sleep Mode settings, each of which makes use of different
mechanisms to enter or leave Sleep Mode. The following table lists the different Sleep Mode
settings and the requirements to transition to and from Sleep Mode for each setting.