User's Manual

MaxStream, Inc. 24XStream Wireless Module Manual v2.8
24
AT Command Binary Command #
Description Parameters
# Bytes Returned Factory Default
RT 22
V4.10
RTS/CMD Control 0 – No binary commands
accessed with RTS/CMD.
1 – Binary commands are sent
when RTS/CMD is asserted.
1 0
SY 23
V4.12
Set Sync Timer. This time
represents the time that the
transmitter and receiver stay in
sync after receiving or sending
data. Setting this parameter to 20
(0x14) will allow any module to
transmit within the next 2 seconds
utilizing a header of 8ms instead of
35ms. Use this parameter to
reduce communication latency and
turn-around time.
Time in tenths of seconds
Range: 0 –FFH
1 0