User's Manual

MaxStream, Inc. 24XStream Wireless Module Manual v2.8
30
FCC Qualifications
IMPORTANT: The 24XStream module has been certified as a module by the FCC for
integration into OEM products without further certification being necessary (as per FCC section
2.1091.) The OEM must satisfy the following requirements in order to comply with FCC
regulations:
1) The system integrator must ensure that the external label provided with this device is
placed on the outside of the final product.
2) In order to comply with the FCC RF exposure requirements, the 24XStream may be used
only with Approved Antennas that have been tested with this module and a minimum
separation distance of 20 cm must be maintained from the antenna to any nearby persons.
The OEM must also include a statement in the final product manual, informing users of
the requirement to maintain 20 cm separation from the antenna to any nearby persons. If
the OEM integrates the 24XStream into their final product, where the final product
utilizes a non-approved antenna or is classified as a portable device per FCC Section
2.1093 (less than 20 cm separation distance between the antenna to any nearby persons),
the OEM is responsible for obtaining a separate authorization on the final product.
Warranty
The 24XStream module from MaxStream is warranted against defects in materials and
manufacturing for a period of 90 days from the date of purchase. In the event of a product failure
due to materials or workmanship, MaxStream will repair or replace the defective product. For
warranty service, return the defective product to MaxStream for prompt repair or replacement.
MaxStream, its suppliers, and its licensors shall in no event be liable for any damages arising
from the use of or inability to use this product. This includes business interruption, loss of
business information, or other losses that may arise from the use of this product.